Elite Money Making Club - Coming Soon Must See...

[UrbanRehabber]

Thanks, Ian

It's great to have some "3rd party" validation (and encouragement) that the wait will have been worth it.

One question: Is there some piece of this we could be working on meanwhile? That would make for a faster kick-off for us. I'm thinking– Maybe figure out my as yet unused aWeber account? Or should that go without saying...(?)

Keep on truckin',

Phil

[littleian]

Hi Phil,

I am obviously not allowed to give much information out, but I do not think that you will go far wrong by getting to grips with your AWeber.

You will be using an auto responder naturally and I am using Aweber too.

There is no need to worry about how much expertise you or anyone else might have because Paul, Davin and Kevin are always there to help out. They also do great little "how to videos" so you can easily follow along.

I am NOT an expert, just a "work in progress" and I was certainly never trained/educated with computers. So if I can do it, most people can.

By the way, I am the one in the group who always asks the "it seems like a dumb question" question. I am never left feeling that I should know the answer from the response I get.

It will change a lot of people's lives if they work at this. We are not miles ahead, and I certainly do not have my own product to sell yet.

Hope that helps you and others

Ian
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

Thanks, Ian

It's great to have some "3rd party" validation (and encouragement) that the wait will have been worth it.

One question: Is there some piece of this we could be working on meanwhile? That would make for a faster kick-off for us. I'm thinking– Maybe figure out my as yet unused aWeber account? Or should that go without saying...(?)

Keep on truckin',

Phil

[falcon1959]

Thanks, Ian

It's great to have some "3rd party" validation (and encouragement) that the wait will have been worth it.

One question: Is there some piece of this we could be working on meanwhile? That would make for a faster kick-off for us. I'm thinking– Maybe figure out my as yet unused aWeber account? Or should that go without saying...(?)

Keep on truckin',

Phil

Hi Phil

There are some great training resources on the aweber site, as well as free webinars you can attend that show you how to use aweber. I watched one last week and even though I have been using aweber for many months I learned some new stuff from one of the webinars.

[samual]

Thank u for your kind information. i will definitely going to try it.

[Ron Boyd]

I know you say coming soon but is there a closer eta I am very interested to see what is on offer .

Regards Ron

[reedhowey]

I know you say coming soon but is there a closer eta I am very interested to see what is on offer .

Regards Ron

Last I heard the ETA is 5 February, tomorrow.

Anyone know any different?

[littleian]

Hi everyone

It's closer than you think -really
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.


Ian

[Dherm]

Yes please save me a place.
regards. Dherm

[Brendan]

Hi everyone

It's closer than you think -really
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.


Ian

Hey Ian Glad to hear alls going well really looking forward to it then it will be
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
's for eveyone

Good luck Paul and Kevin on an upcoming workload of the EMMC
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

[markbrig]

Hi everyone

It's closer than you think -really
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.


Ian

3rd dispatch from EMMC coming soon expedition

This could be the last dispatch before you all get on your way, imagine that. I was trying to look back at base camp only yesterday. We had a feeling that every one of you down there was about to be put on standby to move.

It was a very strong feeling!

I could just about make things out down there (with the field glasses, as you know we've come a long way) all of a sudden I had a strong urge that my final dispatch to you should contain some caution

All of us on this climb came to it with a real sense of excitement and anticipation and indeed that gets stronger the higher we climb.

Whilst we have had very strong leadership from the expedition leaders, at times we have all had to carry our own packs and help carry our fellow climbers packs at some time or another.

One thing I'm glad about was that none of us kept shouting forward every 2 minutes expecting Paul and Kevin to come back and carry our bags, tie our boot laces and mop our sweating brows!

I think we all realised that Paul and Kevin were there to lead and inspire us and show us methods, tactics and idea's that we never existed.

They were not our nursemaids

As with all new things there comes a time when you have to decide Yes! this is the one for me. We all believe that this, the EMMC , is it! The one to break the mould of previous "life changing" seminars and courses etc, you know the type of thing I mean....

But, here's the caution, do you think it's going to come easy and not change your normal routine?? Well [B]wakey wakey /B] get this, your life will change and straight away if you go at this with the right tempo and determination.

This has to be taken very seriously if you want and need change in your life. During the EMMC training and journey things might not run as smooth as you hoped for, you'll be tired and some things just won't sink in.

Well get ready for that feeling and know how you are going to overcome it before it drags you down

So as you set out on yourway be sure that you are going to take whatever steps it needs to complete your training until the day you can set off on your own expeditions.

So work hard and get well buzzed up, this is your opportunity to make some realprogress in this whole game!

I wouldn't be surprised if there was a couple of familiar faces around when you set off!

But remember you don't get a nursemaid on this trip, you work things through, help the others and get used to a growing feeling of "hey this time I'm in the right place at the right time" everything else has led to this and all I've got to do is grab it.

Well make sure you do, with both hands!

Best wishes

Mark

See you on the slopes!

[Paul Lynch]

I just had to write it like this Mark
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
....


Ok troops...we are just rounding up the final numbers then we will be opening the hanger doors. I expect you all to be booted and suited for the journey ahead. Make sure all your weapons and equipment are in tip top condition and I don't want to see a speckle of dirt on your boots!

Standby bye the calling is coming and get ready for the ride of your life
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

[markbrig]

I just had to write it like this Mark
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
....


Ok troops...we are just rounding up the final numbers then we will be opening the hanger doors. I expect you all to be booted and suited for the journey ahead. Make sure all your weapons and equipment are in tip top condition and I don't want to see a speckle of dirt on your boots!

Standby bye the calling is coming and get ready for the ride of your life
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

Paul, I'm luvvin it!

[mrmoonlight]

Polishing my boots, ready to go!

[Brendan]

I just had to write it like this Mark
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
....


Ok troops...we are just rounding up the final numbers then we will be opening the hanger doors. I expect you all to be booted and suited for the journey ahead. Make sure all your weapons and equipment are in tip top condition and I don't want to see a speckle of dirt on your boots!

Standby bye the calling is coming and get ready for the ride of your life
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

Hello Paul really looking forward to this now the suspense is killing me stayed up late polishing my weapons and tools
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
just wondering will it be today and as in the original thread is it still limited to 100 as this thread has a hell of a lot of posts!!!!!!!!!

Regards in anticipation
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
Brendan

[Paul Lynch]

Hi Brendan,

We are working like mad men trying to get all the training videos uploaded into the EMMC, I was up until 3am last night and back online at 7am trying to get these finished. Right now it is 50/50 for today but I can say that this weekend is looking 90% possible
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.


Kevin is plugging away with our chief programmer Ian testing the integration of the JV section which is going to blow you away
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

Hello Paul really looking forward to this now the suspense is killing me stayed up late polishing my weapons and tools
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
just wondering will it be today and as in the original thread is it still limited to 100 as this thread has a hell of a lot of posts!!!!!!!!!

Regards in anticipation
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
Brendan

[Brendan]

Thanks for taking the time out to reply Paul and keeping us up to date with whats happening.
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
hats of to yourself Kevin and Ian for all the hard work you guys have put into the EMMC
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
.... GOOD LUCK to all involved.

Regards Brendan

[Kevin Potts]

Brenda, Paul, Ian and I are working through from early mornings to early mornings the following day.

As you can imagine we are literally creating and building technology to enable us to deliver all we anticipate within EMMC... boy is it exciting.

Assoc (Valerie) was with me in my home yesterday having been the January winner for my 121 meeting via the academy and so I showed her most of what we are working on and anticipating. Just ask her....it will blow you mind.

Not long now...we have cattle prod at 50,000 volts working through our colleague Ian....

Kevin

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

[Brendan]

Brenda, Paul, Ian and I are working through from early mornings to early mornings the following day.

As you can imagine we are literally creating and building technology to enable us to deliver all we anticipate within EMMC... boy is it exciting.

Assoc (Valerie) was with me in my home yesterday having been the January winner for my 121 meeting via the academy and so I showed her most of what we are working on and anticipating. Just ask her....it will blow you mind.

Not long now...we have cattle prod at 50,000 volts working through our colleague Ian....

Kevin

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
Brenda
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
il put that down to tiredness and your infamous spelling
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.
Glad to hear though Kevin hopefully Valerie can do a little post on her adventure day out with you! Il be around as much as possible over the weekend can not wait to get started as im sure many other members cannot either.

P.S you even have COWS working for you G's this place is cool
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.


Regards BRENDAN with an N
To view links or images in this forum your post count must be 10 or greater. You currently have 0 posts.

[falcon1959]

As one of the Beta tester I also want to add my thanks to Paul, Kevin and Davin for what they have helped us to acheive. We have been lucky as we have glimpsed inside before others have had the chance and to say I am excited about it is a real understatement.

I have managed to learn much more than I could ever have imagined and I am sure that the other beta testers would agree with me when I say Kevin, Paul and Davin, thanks for allowing us to enjoy the ride with you guys.

[mick stevenson]

I have to agree with Gary, we have been priviliged to some extraordinary teachings, what we have been shown I honestly cannot put a price on it, this is really going to be the best year ever, no matter whos at what stage of there IM career.

Even though we have been in at the beginning with the testing, we are all just as excited as everybody else and cant wait for the release so we can get going, I feel like the greyhound in the trap, waiting for the rabbit to be released, then theres no turning back, its go go go....................

Mick.